OUR PRODUCTS

The right dies for every process.

From screw forming to special machining, we provide custom manufacturing based on your drawings and production requirements.

NEW PRODUCT FILM

New forming die showcase

A 15-second close-up of the die’s shape, structure and metallic finish.

15 seconds · 1920 × 1080
Created from product photographs to show exterior and structural details. Please enquire to confirm dimensions, materials and supply conditions.

Select play; music volume can be adjusted in the player.

6products and services
Can’t find a product that fully matches your needs?

We accept low-volume, high-mix custom work. Share drawings, dimensions, part material, and operating conditions so we can evaluate a suitable approach together.

Discuss a custom requirement

The die photos show actual LITAI product examples; the tungsten carbide category is represented by die inserts. Machining services use original-site illustrative images, not photos taken at LITAI’s facility. Actual specifications are evaluated from drawings.

Screw Tooling & Accessories

One sourcing window for screw-manufacturing tooling and accessories

LITAI coordinates punch pins, thread rolling dies, punch casings, forming dies, inserts and related accessories around your drawing and process needs; specifications, availability and compatibility are confirmed per project.

Punch pins

Working-end and shank accessories for screw forming operations, coordinated with forming dies, inserts and related components.

RFQ points: Please provide working-end profile, shank diameter, length and material; dimensions and supply scope are confirmed from the drawing.

Request an accessory quote

Thread rolling dies

Forming accessories for thread rolling, coordinated around machine conditions, work material and the required thread result.

RFQ points: Please provide thread size, pitch, handedness, machine/model, dimensions and work material; dimensions and supply scope are confirmed from the drawing.

Request an accessory quote

Punch casings

Housing accessories that locate and support punch pins, coordinated to the installation interface, matching punch and material.

RFQ points: Please provide installation ID/OD, length, matching punch and material; dimensions and supply scope are confirmed from the drawing.

Request an accessory quote

Dimensions and supply scope are confirmed from the drawing; final specifications, materials, lead time and package are agreed during technical review.

MATERIALS & SPECIFICATIONS

Define the material. Specify the application.

A tooling specification starts with the work material, forming load and approved drawing. The information below explains what to discuss with LITAI; it is not a list of certified material values or a promise that every grade is available.

01
CARBIDE GRADE

Tungsten carbide / cemented carbide

Cemented carbide is distinct from tungsten-containing tool steel. For a WC–Co grade, tungsten carbide particles are held by a cobalt binder. Grade selection balances wear resistance with toughness and resistance to chipping under the actual forming conditions.

Confirm the supplier and grade, cobalt content in wt.%, WC grain size, and hardness scale. Density in g/cm³ and transverse rupture strength (TRS) in MPa may be specified where supported by the material documentation.

02
TOOL STEEL GRADE

Tool steel and punch materials

Specify the actual steel grade and material source, together with hardness after heat treatment in HRC. High-speed steel and powder-metallurgical tool steel are different material families; their suitability depends on the punch geometry, load and failure mode.

Carbide hardness is commonly stated in HRA or HV. Tool steel hardness is commonly stated in HRC. These scales must be identified and must not be treated as interchangeable numerical specifications.

03
ASSEMBLY SPECIFICATION

Insert and casing materials

State the insert material separately from the steel casing or supporting components. Define whether the inquiry is for an individual insert, segmented tooling, a casing or an assembled die.

Material availability, supplier-grade equivalence, heat treatment and the delivery scope are confirmed for the individual project. A similar grade name does not establish identical composition or performance.

Material data to confirm

Material grade
Supplier designation and supporting material data; separate the carbide insert from the steel casing.
Cobalt content & grain size
For WC–Co: binder content in wt.% and WC grain classification or size in µm.
Hardness
HRA / HV for carbide, or HRC for steel, with the applicable condition and test scale.
Density & TRS
Density in g/cm³ and transverse rupture strength in MPa, where documented. TRS is a test-specimen property, not a rated operating load for an assembled die.

Critical dimensions, not just a fastener size

Use an approved tooling drawing with dimensions in mm. If an inch drawing is required, state that explicitly. Define dimensional and geometrical tolerances, datums and the measurement location for working-surface roughness Ra in µm.

Forming dies & inserts

Outside diameter, overall length, forming bore or cavity dimensions, entry angle, corner radius and effective forming length. For a hexagonal cavity, distinguish across-flats (AF) from across-corners dimensions.

Punches & working ends

Shank diameter, overall length, working-end geometry and length, together with the required coaxiality or runout relative to the specified datum.

Wire drawing dies

Incoming and outgoing wire diameter, reduction in area, approach geometry and bearing length. State the wire grade, condition and lubrication.

Exact grades, tolerances and surface requirements are agreed against the approved drawing and available manufacturing and inspection data. No universal precision, coating availability or fixed tool-life guarantee is implied.

Technical background

Independent manufacturer references for material and process principles. Their grades, numerical values, services and certificates are not LITAI specifications.

YOUR NEXT PROJECT STARTS HERE

Let us find the answer for your production.

Start with a drawing and discuss your tooling requirements with LITAI.

Start a consultation